3D PRINTER RAMPS1.4 LCD12864 AUTO LCD SCREEN INCLUDE CHINESE FONT

$9.20

sold: 7

Description

Product Name: Chinese font 3D printer RAMPS1.4 LCD12864 intelligent controller
Weight: 160g
Product features:
1 using large screen 12864LCD
2 back integrated SD card, SD card file in section, select the corresponding file can be printed on LCD.
3 product comes with the encoder, you can achieve the parameters adjustment, and file select print!
4.ramps plug and play, but need to modify the firmware to support.
5 support Chinese font, modify the Marlin firmware can display Chinese menu, self modification method, does not provide technical support!
LCD12864 RAMPS kit contains as follows:
LCD12864 1.RAMPS motherboard 1
2.L type transfer plate 1
3.FC cable 2
Note: can be inserted into the SD card, the SD card, please bring your own, this product does not contain!

 

 

Technical support and guarantee:
And official Wiki product http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller, 100%!
Before delivery will make a pass power test, to ensure that the official use of the delivery.
If there is any question welcome in the Baidu Post Bar: http://tieba.baidu.com/makerbase we will reply as soon as possible
Welcome friends to join the discussion group: 156492164.
Product description:
The intelligent controller contains a SD reader, a rotary encoder and a 12864LCD display. You can easily connect it to your RAMPS 1.4 board using the smart adapter included.
This panel is connected to your RAMPS 1.4 after you don’t need your PC, your SD card intelligent controller powered. Further all operations, such as the calibration, axis motion can be done only with a rotary encoder of the intelligent controller. Without the need for computer printing 3D design, just use G code design stored on the SD card
Ramps plug and play, but need to modify the firmware to support, in order to Marlin as an example:
V1 Marlin (New)
In Configuration.h 1.Change “#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER discount full graphic smart controller” (just remove the / / at the beginning)
REMEMBER TO INSTALL U8glib to your ==> ARDUINO library folder:http://code.google.com/p/u8glib/wiki/u8glib
The firmware power, off the Arduino connect, the panel Upload, power reapply, everything should work. and
Installation dimensions:

 

 

Reviews

There are no reviews yet.

Be the first to review “3D PRINTER RAMPS1.4 LCD12864 AUTO LCD SCREEN INCLUDE CHINESE FONT”