Description
Product Name: 3D printer RAMPS1.4 LCD12864 intelligent controller
Weight: 160g
Product features:
The 1 big screen 12864LCD
2 back integrated SD card, SD card file in section, select the corresponding file can be printed on LCD.
3 products with encoder, which can realize the parameter adjustment, and choose to print documents!
4.ramps plug and play, but the need to modify the firmware to support.
5 support Chinese font, modify the Marlin firmware can display Chinese menu, self modification method, does not provide technical support!
RAMPS LCD12864 kit contains the following:
1.RAMPS LCD12864 motherboard 1
2.L type adapter plate 1
3.FC cable 2
Note: insert the SD card SD card offline printing, please bring your own, this product does not contain!
Technical support and guarantee:
And the official Wiki product http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller, 100%!
Do the power test before delivery, which can be used to ship.
Product description:
The intelligent controller contains a SD card reader, a rotary encoder and a 12864LCD display screen. You can easily connect it to your RAMPS 1.4 in the use of “intelligent adapter” included in the.
This panel connected to your RAMPS 1.4, you don’t need your computer, your SD card intelligent controller of power supply. Further all the operations, such as calibration, motion can be done only by the intelligent controller of rotary encoder. Without a computer print 3D design, only the G code stored in the SD card design
Ramps plug and play, but the need to modify the firmware to support, in the case of Marlin:
Marlin V1 (New)
In “Configuration.h”
“1.Change #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER” (just remove the / / at the beginning)
REMEMBER TO INSTALL U8glib to your ==> ARDUINO library folder:http://code.google.com/p/u8glib/wiki/u8glib
Upload the firmware, power off the Arduino, connect the panel, reapply power, and everything should work.
Installation dimensions:
Reviews
There are no reviews yet.