Description
Product Name: MKS TB6600+
This is a high quality, high power, high performance driver! 4.5A high current, high voltage 45V, output short circuit protection, superior performance!
Weight: 105g (with heat sink)
Product introduction:
1, the working voltage of 10V-45V dc. Recommend the use of switching power supply DC24V or DC32V power supply.
2, the 6N137 high speed optocoupler, ensure high speed without loss.
3, the Toshiba new high current, high voltage TB6600HG original chip, with low voltage shutdown, overheat shutdown and over-current protection circuit, and compared to the TB6560 increase of short-circuit protection.
4, the rated maximum output reached: + 4.5A.
5, suitable for 4.2A less than 42, 57, 86 / four / four line two / six wire stepper motor.
6, automatic flow function.
7, subdivision: full step half step, step, 1/4, 1/8, 1/16, 16 segments.
8, volume: 52* wide 82* high 30 (MM)
Product features:
1, the output current can be adjusted continuously, meet the needs of a variety of you.
2, automatic flow function. And equipped with automatic flow switch, easy to use.
3, the 6N137 high speed optocoupler, ensure high speed without loss.
On the back of 4, plate with subdivision settings.
5, by increasing the radiator, good heat dissipation.
6, with output short circuit protection, the use of free.
7, the total input, there are two kinds of input terminals, wiring more convenient.
Special remind:
1, the power supply can not be reversed, or burn chip.
2, the current setting should not exceed the rated current of the motor.
Instructions for use:
1, the working voltage of 10V-45V DC switching power supply, recommend the use of DC32V or DC24V power supply
2, two input terminals, can only enter a group, two groups of terminals are exactly the same, and convenient wiring.
3, the input level is 5V, if the resistance of 12V to string a 1K, if the 24V level, 2.4K needs a resistor string.
4, CLK has a pulse when the motor is running, automatically enter the semi flow state set no pulse, locking motor.
5, DIR high level or when the motor is transferred, the low level inversion.
The normal work of 6, EN high level input or floating, low offline.
Reviews
There are no reviews yet.