Name: 3D printer control board MKS Gen-L V1.0
include 50cm USB line
MKS Gen-L V1.0 motherboard piece;
Does not include, the need for additional purchase:
4 (double headed 5) stepper motor: motor line with 42
Limit switch 3: MKS limit switch
Motor drive 4: 4988 or 8825 or 8729, TMC2100
Display 1: 2004 or 12864
Hot bed 1: MK3
1 sets of hot bed temperature measurement
High current solution:
4.5A large motor drive: MKS TB6600
Drive Diffuser: MKS CD
1, the collection of 2560 and ramps1.4 on a board, to solve the Ramps1.4 composite interface cumbersome, prone to failure.
2, the user can replace the motor drive, support for the 4988 driver and the 8825 driver, TMC2100 driver
3, reserved for external drive signal, can be connected to the large drive to drive 57, 86 motor.
4, the use of high quality MOSFET tube, better heat dissipation, to ensure long-term stability.
5, the use of special power chip, support 12V-24V power input, to solve the problem of Ramps voltage conversion chip heating, power shortage.
6, stable and reliable filtering circuit greatly reduces the possibility of interference, the most likely to avoid the process of printing in the crash, running, etc..
7, the use of CH340 serial chip, in ensuring the premise of stable and reliable, reduce costs, but also to solve the problem of difficult to install 16U2 driver.
8, can accept 24V input, the same system power can be reduced to 1/4 hot bed current, effectively solve the problem of hot bed MOS tube heating.
9, the use of open source firmware Marlin, configuration and ramps1.4 are exactly the same, can be directly replaced by Ramps1.4.
10, can be directly connected to the 2004LCD display and 12864LCD display, can support the development of passenger TFT28, TFT32 touch screen.
11, XYZ axis respectively using different color terminals to the motor and limit switch, convenient wiring.
12, user-friendly design, the use of different colors to distinguish the direction of the terminal to drive, reduce the probability of anti plug, to prevent the plug instead of driving damage to the motherboard.